B3K Toronto
163 Queen St. E Suite 100
Toronto, ON M5A 1S1
(416) 628-8044
info@b3kdigital.com
Hours: Mon-Fri 9am-5:30pm
Kaiser R1 Copy Stand System
Columns
Matt black anodized aluminum section tube, cm and inch scales, height-adjustable holding arm (478 equipped with 2 holding arms) with hard crank, pivotal mount for camera arms. (Models: 4409, 4408, 4478, 4475, 4476, 4474, 4407)
Base Boards
Matt gray, fine grid, cm/inch scale, individually height adjustable feet, base made of die-cast aluminum, with spirit level.
- a
- 5519
- 5518
- 5517
- a
- 80cm / 31.5in.
- 60cm / 23.6in.
- 45cm / 17.7in.
- b
- 60cm / 23.6in.
- 50cm / 19.7in.
- 50cm / 19.7in.
- c
- 53cm / 20.9in.
- 43cm / 16.9in.
- 43cm / 16.9in.
- d
- 32mm / 1.3in.
- 32mm / 1.3in.
- 28mm / 1.1in.
Camera Arms
RTX (5522)
- Horizontally adjustable via parallel guides with fine drive
- Mounting plate turns +/- 90 degrees
- Spirit level
- Camera mounts front/rear
RT 1 (5521)
- Horizontally adjustable via parallel guides
- Two mounting positions for horizontal and vertical format
- Arm tiltable
RTP (5524)
- Horizontally adjustable via parallel guides
- Camera positioning device
RA 1 (5520)
- Camera positioning device
RA 101 (5523)
- For camera with greater distance between tripod mount and optical axis
- Camera positioning device
RLR (5539)
- Camera platform can be shifted horizontally left or right
- Adjustable stops for end position
- Camera can be mounted for hor. or vert. formats
2CC (5540)
- Two camera platform can be shifted horizontally left or right
- For carrying two cameras simultaneously, eg. for comparison shots
Extension Arm (4455)
- Extends the holding arm of the column by 8cm / 3.1 inches
Accessories and Components
Wall Mount
For R1 system columns. Top section adjustable for vertical position. Lower part with base and spirit level. Distance between wall and holding arm front (no camera arm attached): approx. 25cm / 9.8in.
Table Frame
For all stands and base boards of the R1 system. Height-adjustable feet. Slide-in compartment for control box for igniting units.
WXHXD: 58 x 51 x 60 cm (22.8 x 20.1 x 23.6 in.)
Extraneous Light Protector
For R1 and Copylizer systems. Light-tight tent made of black teflon-coated fabric. Front zipper.
Holding support 85 x 80 cm / 33.5 x 31.5 in. fits on 1 m / 39.4 in. and 1.2 m / 47.2 in. columns.
Column Base
For mounting an R1 column on a 5712 copy table, on a 5630 table frame or on table and work plates.
Table Frame and Copy Table
92 x 31 x 68 cm (36.2 x 12.2 x 26.8 in.)
Wall mount – 4412
Table frame – 5508
Extraneous Light Protector – 5549
Column Base – 4427
Table frame – 5630
Copy table – 5712