RB 5070 DX2 Lights (5550)

• LED daylight lighting unit with two light banks for even and soft illumination.
• Emitted light has absolutely no IR and UV content. DC operation provides for flicker free light without residual ripple.
• Each light equipped with 161 selected white SMD LEDs.
• Lights can be dimmed separately or in conjunction. Removable diffusing cover (5466).
• Lights can be tilted, swiveled and adjusted in height.
• Vertical lamp arms tiltable with detents.
• Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.).

LED array: 2 x 161 SMD LEDs
Color temperature: 5600 K
Color rendering index: CRI=95
LED angle of radiation: 110°
Power consumption: 2 x 27 W
Illuminance on subject surface*: 3000 lux

The RB 5070 DX2 lighting unit is suitable for all R1 System copy stands and RD system (5602, 5603)

RB 560 AL LED Lights (5640)

• LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.
• For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.
• The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.
• This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
• Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple.
• Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
• The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.
• Memory function: The copy lighting starts with the brightness that was set before the last switch-off.
• Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.).
• Comes with mains adapter.

LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100°
Max. illumination* with soft screen: 6800 lux * based on uniform illumination of a 16.5 x 11.5 in. flat subject
w/o soft screen: 8000 lux
Power consumption: 2 x ≤ 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 76 cm (29.9 in.) length / 20 x 20 mm (0.8 x 0.8 in.) edge dimension

The RB 560 AL lighting unit is suitable for copy stands of the R1 System and RD system (5602, 5603).

RB 5970 UV Lighting Unit (5596)

UV lighting unit with two light banks, each one fitted with 12 UV-A LEDs for applications in UV and fluorescence photography.

• Each light separately dimmable.
  Constant current driver for flicker-free operation.
  Lights can be tilted, swiveled and adjusted in height.
  Vertical lamp arms with height markings, tiltable with detents.
  Mounted with strong cast clamp bases, clamp width up to 48 mm (1.9 in.).

Light source: 2 x 12 UV-A LEDs (SMD)
Radiation: 365 nm (UV-A)
LED angle of radiation: 100°
Power consumption: 2 x 9 W
Operating voltage: AC 120 V, 60 Hz (see type plate)
Mains lead: 2 x approx. 1.70 m (5.6 ft.)

The RB 5970 UV lighting unit is suitable for all R1 system copy stands and for RS 2 XA (5411), RSD (5602) and RSDmot (5603) copy stands.

RB 5020 DS2 LIGHTS (5467)

• LED daylight lighting unit with two light banks for even and soft illumination.
• Emitted light has absolutely no IR and UV content.
• DC operation provides for flicker free light without residual ripple.
• Each light equipped with 105 selected white SMD LEDs. Lights can be dimmed separately or in conjunction. Removable diffusing cover.
• Lights can be tilted, swivelled and adjusted in height.
• Vertical lamp arms tiltable with detents.
• Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.).

LED array: 2 x 105 SMD LEDs
Color temperature: 5600 K
Color rendering index: CRI=95
LED angle of radiation: 110°
Power consumption: 2 x17 W
Illuminance on subject surface*: 4300 lux

The RB 5020 DS2 lighting system is suitable for all R2 System copy stands (5411, 5301)

* measured with highest possible evenness of illumination of a 9 x 12“ flat subject

RB 570 AX LED Lighting Unit (5652)

LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.

• For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources.
• As the temperature rises, both the brightness and the color temperature would change.
• The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results.
• In addition, the LEDs have a longer service life.
• This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
• Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple.
• Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
• The light intensity of the two LED panels is matched to each other. This results in preciselyhomogeneous illumination with symmetrical alignment of the two light banks.
• Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens.
• Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 55 mm (2.2 in.).
• Comes with mains adapter.

Memory function: The copy lighting starts with the brightness that was set before the last switch-off.

RB 100D LED Lighting Unit (5648)

Daylight-type LED lighting unit with two 100 watt soft lights for even and soft illumination. Dimmable.
Vertical arms with 25 x 25 mm (1.0 x 1.0 in.) cross section and strong die-cast clamp bases.

Lights

LED arrays: 2 x 504 High CRI LEDs
Color temperature: 5600 Kelvin
Color rendition index: CRI ≥ 95
Angle of radiation: 85°
Light emitting area of one light: 51 x 36 cm (20.1 x 14.2 in.)
Power consumption: 2 x 100 W
Operating voltage: 100 – 240 V

Vertical arms

Length: 87 cm (34.3 in.)
Cross section: 25 x 25 mm (1.0 x 1.0 in.)
Max. illumination*: 8200 lux
*based on uniform illumination of a 16.5 x 11.5 in. flat subject

Scope of delivery: 2 x soft light, 2 x vertical arm with die-cast clamp base and angle guide for the light, 2 x mains lead, 4 x cable holder.

Suitable for rePRO system copy stands and for RSDmot 1.8 (5600).

Additional information:

• Excellent lighting quality due to 504 selected LEDs in each light. 5600 Kelvin color temperature (daylight / neutral color rendering), high color rendition index (CRI) of ≥ 95.
• Flicker-free light, free of infrared and UV content.
• Specially textured diffuser screens (51 x 36 cm / 20.1 x 14.2 in.) scatter and direct the emitted light and thus provide for a soft illumination and high illuminance.
• Brightness can be continuously dimmed between 10 and 100 %. Lights can be controlled individually.
• Light housings made of high quality plastic, tiltable and adjustable in height along the vertical arms.
• Vertical arms with height markings, tiltable in detent joints. For re-producible settings.
• Strong die-cast clamp bases for mounting. Clamp width up to 55 mm (2.2 in.).
• Cable holders for attaching the mains leads along the vertical arms.
• Lights can also be used as studio lights on suitable stands and fixtures with 16 mm (5/8″) standard spigot.