B3K Digital

Kaiser rePRO Copy Stand System

Max stability and load capacity, sturdy and vibration resistant, modular design.
For use in photo/video studios, forensics and science, education, research and media production.
Especially suitable to capture large format reflective or transparent originals.
Motorized camera carrier along complete height of column.

KAISER RSP rePRO COLUMN (5612)

Made of special aluminum tube, black anodized, with printed cm/inch scales.
Height adjustment motorized, with two speeds. Cable remote control.
Constant adjustment speed, independent of load. Any height position is exactly held via self-limiting worm-gear. Automatic end switch by magnet sensor.
Camera platform horizontally adjustable by parallel guides with friction drive, hand cranks for right-hand/left-hand operation, two locking screws.
Build-in spirit level. Camera mounting plate 13 x 13 cm (5.1 x 5.1 in.), tiltable by +/- 90°.

Column height: 150 cm (60 in.)
Maximum load: approx. 15 kg (33 lbs.)
Mounting thread: 1/4” / 3/8” exchangeable

SHOP KAISER RSP rePRO COLUMN (5612)

KAISER rePRO TABLE FRAME (5615)

With aluminum die-cast base for 5612 column.
Demountable steel tube construction.
Stacking tray 80 x 50 cm (31 x 20 in.) Height-adjustable feet.

Height without base: approx. 88 x 66 x 78 cm (34.6 x 26 x 30.7 in.)
required floor space: 88 x 104 cm (34.6 x 41 in.)

SHOP KAISER rePRO TABLE FRAME (5615)

KAISER rePRO BASE BOARD (5616)

To be inserted in the 5615 Table Frame.
High-compressed wooden material, all-side plastic-laminated, with printed grid and cm and inch scales.
Includes slide-in carrier for control box of optional lighting unit.

Dimensions (WXD): 80 x 60 cm (31.5 x 23.6 in.).

SHOP KAISER rePRO BASE BOARD (5616)

KAISER RSP XTRA COLUMN (5709)

Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
Camera carrier with motorized height adjustment. Two travel speeds, independent of load.
Self-limiting worm gear: any height position is exactly held. Automatic end switch by magnet sensor. Cable remote control.

Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation. Two blocking screws. Camera mounting plate tiltable by +/- 90°. Built-in spirit level.

Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load: 15 kg (33 lbs.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4“ / 3/8“

SHOP KAISER RSP XTRA COLUMN (5709)

KAISER RSP XTRA COPY STAND (5711)

Heavy-duty copy stand for analogue and digital image capturing work with motor-driven height adjustment.
Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
Column foot made of double strutted steel tube. Steel socket for bolting the column. Four levelling feet.
Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation. Two blocking screws.
Camera mounting plate tiltable by +/- 90°. Built-in spirit level.
Camera carrier with motorized height adjustment.
Two travel speeds, independent of load. Self-limiting worm gear: any height position is exactly held.
Automatic end switch by magnet sensor. Cable remote control.

Stand is supplied without baseboard, intended to be used with Table for Copying Works 5712, with Table 5630 or custom-made devices.

Total height: 227 cm (89.4 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load: 15 kg (33 lbs.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4“ / 3/8“
Required floor space (WxD): 83 x 114 cm (32.7 x 44.9 in.)

SHOP KAISER RSP XTRA COPY STAND (5711)

KAISER RSP 2MOTION COLUMN (5708)

Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales with two-level motor-driven adjustment.
Camera carrier and base board with individual motorized height adjustment. Two travel speeds, independent of load.
Self-limiting worm gear: any height position is exactly held. Automatic end switch by magnet sensor. Anti-collision device.
Cable remote control.
Detachable base board made of 4 mm aluminium with stabilizing substructure.
Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation. Two blocking screws.
Camera mounting plate tiltable by +/- 90°. Built-in spirit level.

Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load: on camera carrier: 10 kg (22 lbs.) on base board: 15 kg (33 lbs.)
Base board: 100 x 80 cm (39.4 x 31.5 in.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4“ / 3/8“

SHOP KAISER RSP 2MOTION COLUMN (5708)

KAISER RSP 2MOTION COPY STAND (5710)

Heavy-duty copy stand for analogue and digital image capturing work with two-level motor-driven adjustment.
Accepts originals up to 100 x 80 cm (39.4 x 31.5 in.).
Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
Column foot made of double strutted steel tube. Steel socket for bolting the column. Four levelling feet.Detachable base board made of 4 mm aluminium with stabilizing substructure.
Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation. Two blocking screws.
Camera mounting plate tiltable by +/- 90°. Built-in spirit level.
Camera carrier and base board with individual motorized height adjustment. Two travel speeds, independent of load. Self-limiting worm gear: any height position is exactly held.
Automatic end switch by magnet sensor. Anti-collision device.
Cable remote control.

Total height: 227 cm (89.4 in.)
Maximum working span: 160 cm (63 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load: on camera carrier: 10 kg (22 lbs.) on base board: 15 kg (33 lbs.)
Base board: 100 x 80 cm (39.4 x 31.5 in.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4“ / 3/8“
Required floor space (WxD): 100 x 126 cm (39.4 x 49.6 in.)

KAISER RSP 2MOTION COPY STAND (5710)

Lighting Systems

RB 570 AX LED Lighting Unit (5652)

LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.

For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources.
As the temperature rises, both the brightness and the color temperature would change.
The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results.
In addition, the LEDs have a longer service life.
This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple.
Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
The light intensity of the two LED panels is matched to each other. This results in preciselyhomogeneous illumination with symmetrical alignment of the two light banks.
Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens.
Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 55 mm (2.2 in.).
Comes with mains adapter.

Memory function: The copy lighting starts with the brightness that was set before the last switch-off.

SHOP RB 570 AX LED Lighting Unit (5652)

RB 100D LED Lighting Unit (5648)

Daylight-type LED lighting unit with two 100 watt soft lights for even and soft illumination. Dimmable.
Vertical arms with 25 x 25 mm (1.0 x 1.0 in.) cross section and strong die-cast clamp bases.

Lights

LED arrays: 2 x 504 High CRI LEDs
Color temperature: 5600 Kelvin
Color rendition index: CRI ≥ 95
Angle of radiation: 85°
Light emitting area of one light: 51 x 36 cm (20.1 x 14.2 in.)
Power consumption: 2 x 100 W
Operating voltage: 100 – 240 V

Vertical arms

Length: 87 cm (34.3 in.)
Cross section: 25 x 25 mm (1.0 x 1.0 in.)
Max. illumination*: 8200 lux
*based on uniform illumination of a 16.5 x 11.5 in. flat subject

Scope of delivery: 2 x soft light, 2 x vertical arm with die-cast clamp base and angle guide for the light, 2 x mains lead, 4 x cable holder.

Suitable for rePRO system copy stands and for RSDmot 1.8 (5600).

Additional information:

Excellent lighting quality due to 504 selected LEDs in each light. 5600 Kelvin color temperature (daylight / neutral color rendering), high color rendition index (CRI) of ≥ 95.
Flicker-free light, free of infrared and UV content.
Specially textured diffuser screens (51 x 36 cm / 20.1 x 14.2 in.) scatter and direct the emitted light and thus provide for a soft illumination and high illuminance.
Brightness can be continuously dimmed between 10 and 100 %. Lights can be controlled individually.
Light housings made of high quality plastic, tiltable and adjustable in height along the vertical arms.
Vertical arms with height markings, tiltable in detent joints. For re-producible settings.
Strong die-cast clamp bases for mounting. Clamp width up to 55 mm (2.2 in.).
Cable holders for attaching the mains leads along the vertical arms.
Lights can also be used as studio lights on suitable stands and fixtures with 16 mm (5/8″) standard spigot.

SHOP RB 100D LED Lighting Unit (5648)

Accessories

WALL MOUNT rePRO (5614)

For wall mounting the 5612 column and the columns of 5710/5711.
Lower part with base, spirit level and compartment for power supply. Top section adjustable for vertical column positioning. Screws and dowels included.

Distance wall – column: approx. 35 cm (13.8 in.)
Distance wall – camera platform with 5612: approx. 51 – 73 cm (20.1 – 28.7 in.)
Distance wall – camera platform with 5710/5711: approx. 79 – 102 cm (31.1 – 40.2 in.)

SHOP WALL MOUNT rePRO (5614)

Book Cradle 45/30 (5631)

Special support for protective copy work from books with open sizes up to 73 x 45 cm (28.7 x 17.7 in.) and a thickness of 15 cm (5.9 in.).
Lockable pressure plate made of 6 mm thick float glass, with antireflection coating on both sides.
Easy to unlock by means of release rails on both sides. Glass plate locks in opening position.
Two foam-padded platforms – each 30 x 45 cm (11.8 x 17.7 in.) – with adjustable space for spines of different sizes.
One-time height adjustment for optimal pressure by means of spindle drive with hand crank.
Subsequently automatic pressure control after each turning of a page. Mechanism for quick pressure release and subsequent resetting with previous pressure.
Fold-out support bracket to hold large-sized books (up to 90 x 60 cm (35.4 x 23.6 in.) open size) while individual pages are positioned underneath the pressure plate.

Dimensions (WxHxD): 860 x 555 x 650 mm (33.9 x 21.9 x 25.6 in.)
Weight: approx. 57 kg (126 lbs.)

SHOP Book Cradle 45/30 (5631)

Table (5630)

For 5631 Book Cradle. Sturdy steel tube construction. Matte grey, plastic-laminated base board 86 x 3.2 x 60 cm (33.9 x 1.3 x 23.6 in.). Can be equipped with casters or height-adjustable feet.
Also suitable as copy table, e.g. together with RSP Xtra Copy Stand.
R1 and RD system columns can be mounted via base (optional, 4427 resp. 5625).

Dimensions (WxD): 92 x 68 cm (36.2 x 26.8 in.)
Height: 31 cm (12.2 in.) with casters, 25 cm (9.8 in.) with feet

SHOP TABLE (5630)

WOLFENBUTTEL BOOK REFLECTOR 45N (5780)

Device for digital reproduction of damageable historic books and documents with critical condition, especially for books that can not be opened for more than 45°.
All movements are done manually for maximum protection of the book.
Modular concept: The user chooses the suitable camera and lighting.

Functional principle:

The opened book is placed in a V-shaped book cradle and retained there. A V-shaped wedge with a glass plate on one side and a mirror on the opposite side is moved manually into the opened book and is locked into position. The two side rests, that are opened at an angle of a bit more than 45° are now manually moved to the book cover at exactly 45°. The glass plate of the wedge flattens the page that has to be reproduced. The mirror image is now digitally photographed or scanned. A suitable software will now convert the digital image into a true sided image.

horizontally movable table for precise positioning
padded book spine rest with foam filling and teflonized fabric cover
padded book cover rests are individually horizontally movable via gear rack with hand drive for alignment to the thickness of the book
adjustment of the inclination of the side rests via hand-operated swivel mechanism
vertically movable mirror wedge with counter balance mounting and hand-operated brake via bowden wire
separate camera stand with H-foot and vertical column
height adjustable feet
camera carrier with 22.5 inclination and 40 cm (15 in) travelling distance for frame adjustment
holding arm for camera with gear rack and hand crank

Basic table (WxHxD): 88 x 75 x 78 cm (24 x 29 x 30 in)
Max. book/page dimensions: 45 x 45 cm (17.5 x 17.5 in)
Max. thickness of book: 20 cm (7.9 in)
Covered area close to fold: approx. 4 mm
Total height of book reflector: 2.07 m (7 ft)
Total height of camera stand: 2.0 m (6.5 ft)
Required floor space for book reflector and camera stand: max 150 x 120 cm (5 x 4 ft)

SHOP WOLFENBUTTEL BOOK REFLECTOR 45N (5780)

CONTACT US

163 Queen St. E Suite 100
Toronto, ON M5A 1S1

(416) 628-8044
info@b3kdigital.com

Hours: Mon-Fri 9am-5:00pm

Kaiser rePRO Copy Stand System

KAISER RSP rePRO COLUMN (5612)

KAISER rePRO TABLE FRAME (5615)

KAISER rePRO BASE BOARD (5616)

KAISER RSP XTRA COLUMN (5709)

KAISER RSP XTRA COPY STAND (5711)

KAISER RSP 2MOTION COLUMN (5708)

KAISER RSP 2MOTION COPY STAND (5710)

Lighting Systems

RB 570 AX LED Lighting Unit (5652)

RB 100D LED Lighting Unit (5648)

Lights

Vertical arms

Additional information:

Accessories

WALL MOUNT rePRO (5614)

Book Cradle 45/30 (5631)

Table (5630)

WOLFENBUTTEL BOOK REFLECTOR 45N (5780)

CONTACT US

Where to Find Us