RSD 1.2 COPY STAND (5602)

• Column made of special aluminum multi-section tubing, matte black anodized, with cm and inch scales.
• Camera carrier made of aluminum section, can be horizontally adjusted over approx. 16 cm (6.3 in.) with rack-and-pinion parallel guides.
• Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position. Camera mounting plate tiltable by ± 90°. Connecting screw horizontally adjustable.
• Height adjustment with hand crank. Large non-reflecting matt grey base plate with printed grid, cm and inch scales. Feet adjustable in height. Spirit level.

Base plate (WxHxD): 680 x 38 x 570 mm (26.8 x 1.5 x 22.4 in.)
Height of column: 1.20 m (3.9 ft.)
Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
Loading capacity: 8 kg (17.6 lbs.)
Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
Reversing mounting thread: 1/4” / 3/8” changeable

RSD MOT COPY STAND (5603)

• Column made of special aluminum multi-section tubing, matte black anodized, with cm and inch scales.
• Camera carrier made of aluminum section, can be horizontally adjusted over approx. 16 cm (6.3 in.) with rack-and-pinion parallel guides.
• Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
• Camera mounting plate tiltable by ± 90°. Connecting screw horizontally adjustable.
• Large non-reflecting matte grey base plate with printed grid, cm and inch scales. Feet adjustable in height. Spirit level.
• Height adjustment motorized, with two speeds. Cable remote control.
• Constant adjustment speed, independent of load. Automatic end switch by magnet sensor.

Base plate (WxHxD): 680 x 38 x 570 mm (26.8 x 1.5 x 22.4 in.)
Height of column: 1.20 m (3.9 ft.)
Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
Loading capacity: 8 kg (17.6 lbs.)
Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
Reversing mounting thread: 1/4” / 3/8” changeable

RDmot 1.2 COLUMN (5623)

• Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales.
• Camera carrier made of aluminum section, can be horizontally adjusted over approx. 16 cm (6.3 in.) with rack-and-pinion parallel guides.
• Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
• Camera mounting plate tiltable by ± 90°. Connecting screw horizontally adjustable.
• Height adjustment motorized, with two speeds. Cable remote control. Constant adjustment speed, independent of load. Automatic end switch by magnet sensor.

Column height: 1.20 m (3.9 ft.)
Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
Loading capacity: 8 kg (17.6 lbs.)
Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
Reversing mounting thread: 1/4” / 3/8” changeable

RDmot 1.8 COLUMN (5620)

• Column made of special aluminum multisection tubing, matte black anodized, with cm and inch scales.
• Camera carrier made of aluminum section, can be horizontally adjusted over approx. 25 cm (9.8 in.) with rack-and-pinion parallel guides.
• Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
• Camera mounting plate tiltable by ± 90°. Connecting screw horizontally adjustable.
• Height adjustment motorized, with two speeds. Cable remote control. Constant adjustment speed, independent of load. Automatic end switch by magnet sensor.

Column height: 1.80 m (5.9 ft.)
Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
Loading capacity: 8 kg (17.6 lbs.)
Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
Reversing mounting thread: 1/4” / 3/8” changeable

COLUMN BASE (5625)

For mounting a RD column on a 5712 copy table, on a 5630 table frame or on a table and work plates.

TABLE (5712)

• Sturdy steel tube construction, lower rods with additional track rollers for sliding on the RSP Xtra copy stand base.
• Matt-grey, plastic-laminated base board 86 x 3.2 x 60 cm (33.9 x 1.3 x 23.6 in.).
• Four casters (two lockable).
• R1 and RD system columns can be mounted via base (optional, 4427 resp. 5625)

Dimensions (WxHxD): 92 x 49 x 68 cm (36.2 x 19.3 x 26.8 in.)

TABLE (5630)

• Sturdy steel tube construction. Matte grey, plastic-laminated base board 86 x 3.2 x 60 cm (33.9 x 1.3 x 23.6 in.). Can be equipped with casters or height-adjustable feet.
• Also suitable as copy table, e.g. together with RSP Xtra Copy Stand.
• R1 and RD system columns can be mounted via base (optional, 4427 resp. 5625).

Dimensions (WxD): 92 x 68 cm (36.2 x 26.8 in.)
Height: 31 cm (12.2 in.) with casters, 25 cm (9.8 in.) with feet